ADVANCED FIREARM COATINGS

State of the art coatings for the ultimate ALLOY XTREME handgun.

Premium finishes guaranteed for the life of the firearm against corrosion, peeling and flaking.

Robar's NP3 and Roguard coatings not only protect your firearm but also make it function smoother and are easier to clean and maintain.

NP3

NP3 is a surface treatment for steel and metal alloys that combines sub-micron particles of PTFE(polytetrafluoroethylene), otherwise known as Teflon, with electroless nickel. NP3 is an electroless process, meaning all surfaces are evenly plated, which is not always the case with conventional electro-plated coatings like hard chrome. Coating thickness can be maintained to within .0002" or two ten thousandths of one inch, guaranteeing consistent quality coatings. With the Teflon evenly distributed and locked into the nickel-phosphorus matrix, NP3 is a true composite. If wear occurs, fresh particles of PTFE are exposed to keep the opposing surfaces lubricated throughout the life of the coating.

Very accurate and even coating on all surfaces.

No additional lubrication is needed.

Cleaning is minimal, usually only a soft cloth.

Fire for longer periods between cleaning, dirt and powder residue has no wet or oily surface to cling to.

NP3 has a micro hardness of 48-51 Rockwell.

NP3 is very corrosion resistant.

NP3 has a high lubricity and low friction co-efficient meaning a longer firearm life expectancy.

NP3 will prevent galling, a problem common with stainless steel.

NP3 is a satin gray, non-reflective color ideal for all firearms.

NP3 on internal parts makes your gun run smoother.

If NP3 is perforated, corrosion will not spread under the coating.

NP3 is guaranteed against corrosion, peeling or flaking for the lifetime of the firearm.

ROGUARD

Roguard, a black finish available in a satin or matte appearance, is a phenolic-based finish containing molybdenum-disulfide, specifically designed to provide lubricity and corrosion protection for metal components exposed to harsh environments. Designed expressly as a superior protective coating for firearms, Roguard provides the lubrication and corrosion protection necessary to meet or exceed U.S. Military Machine Gun Dry Firing Requirements after 60 days sea water immersion or 1000 hours salt spray MIL-STD-TEST.

Roguard is polymer coating technology at its best. Twice as hard as conventional spray-on coatings and twice as corrosion-resistant, Roguard will take far more punishment than any other black finish available - tested both in the laboratory and in the field. We are so confident, we give it a lifetime guarantee against peeling, flaking and corrosion!

�2008 The Robar Companies, Inc.